China High Frequency Welded Tube Line, Welded Pipe Making Machine

Product Description

Introduction: The high-frequency welded pipe production line is used to produce both welded pipes of 10-38mm in diameter and 0.5-2.5mm in wall thickness. Square and rectangular pipes and deformed pipes of the corresponding size are available too.

Technological process:

Uncoiling - Cutting and welding - cage accumulator -(feeding\forming), (seam guide\HF welding\squeezing\deburring), water cooling, sizing, rough straightening - STD flying saw -checking and collecting -packing-storage

Main specifications:

(1) Raw material specifications

(2) Low carbon steel, low alloy constructional steel CR, HR, GI coils

(3) Mechanical properties: Σb≤ 520Mpa, σs≤ 340MPa

(4) Width range of steel strip: 30-120mm

(5) Thickness of steel strip: 0.5-2.5mm

(6) Strip coil

Inner diameter: φ 580-φ 640mm

Outer diameter: φ 800-φ 1500mm

Coil weight: ≤ 1.5 tonv

Finished pipe specifications:

(1) Pipe diameter φ 10-φ 38mm

(2) Wall thickness 0.5~2.5mm for round pipes; 0.5-1.8mm for square/rectangular pipes.

(3) Length of cutting 4~9m

(4) Length-cutting precision: +/-3mm

Forming speed

20~100m/min

Total power capacity

Approx. 400kw

Compressed air:

(1) Flow rate: 6m3/min

(2) Pressure: 5-7kg/ cm2

Water supply for machine set

(1) Flow rate: 20t/h-30 t/h

(2) Reservation pool capacity: 30m3

Workshop arrangement:

Width of workshop: 6m

Length of workshop: 50m

Height of workshop (from ceiling trail to floor): ≥ 5 m

INLET(OUTLET)LOOPER

Inquire

• Subject:
• *Name:
• *Phone:
• *Email:
• To:
  Hei Yan
  
• *Messages:
  Your message must be between 20-8000 characters